manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 194 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 194

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

194

:MEASure:GSM[:CONTinuous]:RFTX:POWer

Syntax

:MEASure:GSM[:CONTinuous]:RFTX:POWer

Parameters

There are no parameters.

Description

Starts a continuous measurement of the mobile RF output power level. To read out the latest measurement result, 
use the :FETCh:GSM:RFTX:POWer command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number with the 
physical dimension of dBm.

Example

:MEASure:GSM:CONTinuous:RFTX:POWer?
The string returned is: "11.22".

:MEASure:GSM[:CONTinuous]:RFTX:TEMPlate

Syntax

:MEASure:GSM[:CONTinuous]:RFTX:TEMPlate

Parameters

There are no parameters.

Description

Starts a continuous check of the UL burst against the power/time template (PTT). To read out the latest measurement 
result, use the :FETCh:GSM:RFTX:TEMPlate command.
Note: The power/time template can also be set using the :CALC:RFTX:TEMP commands.

Query

The query form of this command starts the (continuous) check and returns a result value as soon as the first check 
has been completed. The string delivered back contains one boolean number.
A 0 indicates that there was no violation of the PTT, while a 1 means that the last burst measured did violate the PTT.

Example

:MEASure:GSM:CONTinuous:RFTX:TEMPlate
This command starts the continuous check of the burst against the PTT.

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов