Cleco 17BP B, Инструкция по эксплуатации

Страница: 43 / 62

91e_Trouble shooting en bedingt.fm, 10.09.2010
P1890E/EN 2010-08 43
Troubleshooting
9
Problem Possible cause Action
868 MHz data communication between controller and tool
No serial communication
is possible between the
controller and the base
station. (Error displayed
after
Accept <F1> is
pressed in Communica-
tion/Tool .)
Wrong serial cable is
used.
➔
Use a null modem cable (crossed).
Wrong port is selected
for connection with the
controller.
➔
In the Communication/Tool screen of the con-
troller, check the port settings for RF Serial .
Note: If the settings are changed, it is necessary to
press Accept <F1> in order to apply the settings.
➔
Check that the serial cable is connected to the
selected port.
Selected port is used for
serial data transmission.
➔
In the Communication/Data Transmission
screen of the controller, check whether serial
data transmission is enabled (the protocol is set
to anything except NONE), and whether the
same port is being used.
➔
If so, select a different port or disable serial data
transmission.
➔
Check all available tools as necessary. The
same port cannot be used for serial data trans-
mission and data communication with base sta-
tion tool.
Power outlet not active.
➔
Check the voltage at the outlet socket where the
base station is plugged in for power supply.