Cleco 17BP B, Инструкция по эксплуатации

Страница: 33 / 62

91c_LCD en bedingt.fm, 10.09.2010
P1890E/EN 2010-08 33
LCD display
7
7.3.10 Wireless transmission RF15.4 submenu
only available on models from series 17BPZ…
The RF15.4 wireless transmission submenu shows the settings being used. If no actions are carried out, the
menu is automatically exited after 60 seconds.
Programming the wireless settings is described in the controller programming manual.
Displays the transmission power and allows you to configure settings.
➔
<F1>: Activate a lower transmission power.
➔
<F2>: Activate a higher transmission power.
➔
Press the start button or <F2> longer than 2
seconds to accept the select and display the next menu item.
➔
Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
For 868 MHz, the maximum transmission power depends on the selected channel.
If channel 1 is selected, you can choose between 1, 5, 10, and 25 mW for the
transmission power. If channel 2 or 3 is selected, you can choose either 1 or 5 mW
for the transmission power.
➔
Press the start button or <F2> longer than 2
seconds to accept the select and display the next menu item.
➔
Press <F1> longer than 2 seconds to delete the selection and exit the
menu.
Displays the radio channel being used and allows you to configure settings.
Channel 11 – 26 as per IEEE802.15.4 are available for selection (2.4 GHz range).
Displays the radio channel being used and allows you to configure settings.
➔
Start button>: show channel (default: 21).
➔
<F1>: Activate a lower channel.
➔
<F2>: Activate a higher channel.
➔
Press the start button or <F2> longer than 2 seconds
to accept the selection and display the next menu item.
➔
Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
NOTE
The channel must match the set channel of the base station.
Defines the network identification. You can operate no more than 4 tools per PAN ID.
➔
Start button>: show PAN ID (default: C007).
Power
25 mW
RF15.4
Chan-
nel
Chan-
nel
21
RF15.4
PAN