Cleco 17BP B, Инструкция по эксплуатации

Страница: 30 / 62

30 P1890E/EN 2010-08
91c_LCD en bedingt.fm, 10.09.2010
LCD display
7
7.3.6 Set position submenu – only with Linking enabled
7.3.7 Scanner submenu – only for types of the 17BP…S… series
7.3.8 WLAN wireless transmission submenu
– only for types of the 17BPX… series
The WLAN RF settings submenu shows the settings being used.
If no actions are carried out, the menu is automatically exited after 60 seconds.
Programming the RF settings for WLAN data transmission is described in the programming manual of the
control.
Selects the position to be used next.
You can skip the position.
You can select the position to be used next using the function keys:
➔
<F1>: Activate the previous position.
➔
<F2>: Activate the next position.
➔
Press the start button or <F2> longer than 2
seconds to accept the select and display the next menu item.
➔
Press <F1> longer than 2 seconds
to delete the selection and exit the menu.
Reset linking to position 1. The machine operator can cancel Linking.
Scanner – Deletes a previously read barcode and activates a new read cycle.
➔
Press the Start button or <F2> for longer than 2 seconds.
Displays the installed software version of the wireless module.
MAC address display
>Posit
Change
Positi
Select
Positi
2/6
>Posit
Reset
Positi
>Scann
Activa
Scanne
Versio
#27173
Dec 1
MAC
00302e
e162f8