Cleco 17BP B, Инструкция по эксплуатации

Страница: 18 / 62

18 P1890E/EN 2010-08
91b_1_5 en bedingt.fm, 10.09.2010
Before initial operation
5
5 Before initial operation
The 17BP has been configured by Cooper Power Tools & GmbH & Co. OHG. A setting for your specific
screw joint needs must only be made with the controller or a computer by a qualified person. For more infor-
mation, refer to the controller programming manual.
5.1 Setting up tool holder
➔
Mount the tool holder on a stable base.
For tool holder with IrDA interface port:
➔
Select the location in such a way that no outside light shines onto the tool holder.
This can inhibit data transmission.
➔
Lay the connection cable in such a way that there is no danger that persons can trip.
5.2 Ambient conditions
5.3 Charging the battery
Battery is only partly charged when delivered.
➔
Charge fully before first use. See Instruction manual accupack.
5.4 Changing the screw inserts
Abb. 5-1
Screw bits (GETA / APEX recommended):
Connection in accordance with DIN 3126, form E 6,3 (¼" shank).
Ambient temperature 0 °C (32 °F) to m40° C (+104° F)
Humidity 0 to 80 %, not with dew
Working height up to 1000 m above sea level
1.
2.
1.
2.
Insertion
Removal