Chapter 1 Managing GSS Devices from the GUI
Activating and Modifying GSS Devices
1-10
Cisco Global Site Selector Administration Guide
OL-10410-01
3.
Click the
Modify GSS
icon for the first GSS to activate. The Modifying GSS
details page appears (see
Figure 1-5
).
4.
In the Global Site Selector Name field, enter a new name for the device. You
use the device name to easily distinguish one GSS device from another in the
primary GSSM list pages, where many devices may appear together.
5.
From the Location drop-down list, choose a new device location.
6.
Click
Submit
to save your changes, and return to the Global Site Selector list
page.
Deleting GSS Devices
Deleting a GSS device such as a GSS or a standby GSSM allows you to remove
the nonfunctioning device from your network or reconfigure and then reactivate a
GSS device. With the exception of the primary GSSM, you can delete GSS
devices from your network through the primary GSSM GUI.
To delete a GSS device from the primary GSSM GUI, perform the following
steps:
1.
Click the
Resources
tab.
2.
Click the
Global Site Selectors
navigation link. The Global Site Selectors list
page appears.
3.
Click the
Modify GSS
icon located to the left of the GSS device you want to
delete. The Modifying GSS details page appears.
4.
Click the
Delete
icon in the upper right corner of the page. The GSS software
prompts you to confirm your decision to delete the GSS device.
5.
Click
OK
to confirm your decision and return to the Global Site Selectors list
page. The deleted device is removed from the list.
To reconfigure the GSS device, see the
Cisco Global Site Selector Getting Started
Guide
.
