1-9
Cisco Global Site Selector Administration Guide
OL-10410-01
Chapter 1 Managing GSS Devices from the GUI
Activating and Modifying GSS Devices
Figure 1-6
Global Site Selectors List Page—Active Status
6.
Repeat Steps 1 through 5 for each inactive GSS or standby GSSM.
Modifying GSS Device Name and Location
You can modify the name and location of any of your GSS devices using the
primary GSSM GUI. To modify other network information such as the hostname,
IP address, or role, you must access the CLI on that GSS device (see the
Cisco
Global Site Selector Getting Started Guide
).
To modify the name and location of a GSS device from the primary GSSM GUI,
perform the following steps:
1.
Click the
Resources
tab.
2.
Click the
Global Site Selectors
navigation link. The Global Site Selectors list
page appears (see
Figure 1-4
). All active GSS devices appear with an
“
Online” status. The GSS devices requiring activation appear with an
“Inactive” status.
