2-383
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco
Catalyst
Blade Switch 3030 Cisco IOS Commands
show mvr members
show mvr members
Use the
show mvr members
privileged EXEC command to display all receiver and source ports that are
currently members of an IP multicast group.
show mvr members
[
ip-address
] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
show mvr members
command applies to receiver and source ports. For MVR-compatible mode, all
source ports are members of all multicast groups.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mvr members
command:
Switch#
show mvr members
MVR Group IP Status Members
------------ ------ -------
239.255.0.1 ACTIVE Gi0/1(d), Gi0/5(s)
239.255.0.2 INACTIVE None
239.255.0.3 INACTIVE None
239.255.0.4 INACTIVE None
239.255.0.5 INACTIVE None
239.255.0.6 INACTIVE None
239.255.0.7 INACTIVE None
239.255.0.8 INACTIVE None
239.255.0.9 INACTIVE None
239.255.0.10 INACTIVE None
<output truncated>
ip-address
(Optional) The IP multicast address. If the address is entered, all receiver and
source ports that are members of the multicast group appear. If no address is
entered, all members of all Multicast VLAN Registration (MVR) groups are
listed. If a group has no members, the group is listed as Inactive.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.