2-53
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
deny (MAC access-list configuration)
Note
Though visible in the command-line help strings,
appletalk
is not supported as a matching condition.
To filter IPX traffic, you use the
type mask
or
lsap
lsap mask
keywords, depending on the type of IPX
encapsulation being used. Filter criteria for IPX encapsulation types as specified in Novell terminology
and Cisco IOS terminology are listed in
Table 2-4
.
Defaults
This command has no defaults. However; the default action for a MAC-named ACL is to deny.
Command Modes
MAC-access list configuration
Command History
lsap
lsap-number
mask
(Optional) Use the LSAP number (0 to 65535) of a packet with 802.2
encapsulation to identify the protocol of the packet.
mask
is a mask of
don’t care
bits applied to the LSAP number before
testing for a match.
mop-console
(Optional) Select EtherType DEC-MOP Remote Console.
mop-dump
(Optional) Select EtherType DEC-MOP Dump.
msdos
(Optional) Select EtherType DEC-MSDOS.
mumps
(Optional) Select EtherType DEC-MUMPS.
netbios
(Optional) Select EtherType DEC- Network Basic Input/Output System
(NETBIOS).
vines-echo
(Optional) Select EtherType Virtual Integrated Network Service (VINES)
Echo from Banyan Systems.
vines-ip
(Optional) Select EtherType VINES IP.
xns-idp
(Optional) Select EtherType Xerox Network Systems (XNS) protocol
suite (0 to 65535), an arbitrary Ethertype in decimal, hexadecimal, or
octal.
Table 2-4
IPX Filtering Criteria
IPX Encapsulation Type
Filter Criterion
Cisco IOS Name
Novel Name
arpa
Ethernet II
Ethertype 0x8137
snap
Ethernet-snap
Ethertype 0x8137
sap
Ethernet 802.2
LSAP 0xE0E0
novell-ether
Ethernet 802.3
LSAP 0xFFFF
Release
Modification
12.2(25)SEE
This command was introduced.