2-340
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco
Catalyst
Blade Switch 3030 Cisco IOS Commands
show mac access-group
show mac access-group
Use the
show mac access-group
user EXEC command to display the MAC access control lists (ACLs)
configured for an interface or a switch.
show mac access-group
[
interface
interface-id
] [
|
{
begin | exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter |
exclude
output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mac-access group
user EXEC command. In this display,
port 2 has the MAC access list
macl_e1
applied; no MAC ACLs are applied to other interfaces.
Switch>
show mac access-group
Interface GigabitEthernet0/1:
Inbound access-list is not set
Interface GigabitEthernet0/2:
Inbound access-list is macl_e1
Interface GigabitEthernet0/3:
Inbound access-list is not set
Interface GigabitEthernet0/4:
Inbound access-list is not set
<output truncated>
This is an example of output from the
show mac access-group
interface gigabitethernet0/1
command:
Switch#
show mac access-group interface gigabitethernet0/1
Interface GigabitEthernet0/1:
Inbound access-list is macl_e1
interface
interface-id
(Optional) Display the MAC ACLs configured on a specific interface. Valid
interfaces are physical ports and port channels; the port-channel range is 1
to 48 (available only in privileged EXEC mode).
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
