2-356
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco
Catalyst
Blade Switch 3030 Cisco IOS Commands
show mac address-table notification
show mac address-table notification
Use the
show mac address-table notification
user EXEC command to display the MAC address
notification settings for all interfaces or the specified interface.
show mac address-table
notification
[
interface
[
interface-id
]] [
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Use the
show mac address-table notification
command without any keywords to display whether the
feature is enabled or disabled, the MAC notification interval, the maximum number of entries allowed
in the history table, and the history table contents.
Use the
interface
keyword to display the flags for all interfaces. If the
interface-id
is included, only the
flags for that interface appear.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mac address-table
notification
command:
Switch>
show mac address-table notification
MAC Notification Feature is Enabled on the switch
Interval between Notification Traps : 60 secs
Number of MAC Addresses Added : 4
Number of MAC Addresses Removed : 4
Number of Notifications sent to NMS : 3
Maximum Number of entries configured in History Table : 100
Current History Table Length : 3
MAC Notification Traps are Enabled
History Table contents
----------------------
History Index 0, Entry Timestamp 1032254, Despatch Timestamp 1032254
MAC Changed Message :
interface
(Optional) Display information for all interfaces. Valid interfaces include
physical ports and port channels.
interface-id
(Optional) Display information for the specified interface. Valid interfaces
include physical ports and port channels.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.