2-375
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco
Catalyst
Blade Switch 3030 Cisco IOS Commands
show mls qos vlan
show mls qos vlan
Use the
show mls qos vlan
user EXEC command to display the policy maps attached to a switch virtual
interface (SVI).
show mls qos vlan
vlan-id
[ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
The output from the
show mls qos vlan
command is meaningful only when VLAN-based quality of
service (QoS) is enabled and when hierarchical policy maps are configured.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is an example of output from the
show mls qos vlan
command:
Switch>
show mls qos vlan 10
Vlan10
Attached policy-map for Ingress:pm-test-pm-2
Related Commands
vlan-id
Specify the VLAN ID of the SVI to display the policy maps. The range is 1 to
4094.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
Command
Description
policy-map
Creates or modifies a policy map that can be attached to
multiple ports and enters policy-map configuration mode.
