C-10
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
show platform layer4op
show platform layer4op
Use the
show platform layer4op
privileged EXEC command to display platform-dependent Layer 4
operator information.
show platform layer4op
{
acl
|
pacl
[
port-asic
] |
qos
[
port-asic
]} {
and-or
|
map
|
or-and
|
vcu
} [
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
acl
Display access control list (ACL) Layer 4 operators information.
pacl
[
port-asic
]
Display port ACL Layer 4 operators information. The keyword has this meaning:
•
port-asic
—(Optional) Port ASIC number.
qos
[
port-asic
]
Display quality of service (QoS) Layer 4 operators information. The keyword has
this meaning:
•
port-asic
—(Optional) QoS port ASIC number.
and-or
Display AND-OR registers information.
map
Display select map information.
or-and
Display OR-AND registers information.
vcu
Display value compare unit (VCU) register information.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
