C-19
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
show platform port-asic
Note
Though visible in the command-line help strings, the
stack
{
control
|
dest-map
|
learning
|
messages
|
mvid
|
prog-parser
|
span
|
stats
[
asic
number
|
port
number
[
asic
number
]] keywords are not
supported.
Command Modes
Privileged EXEC
Command History
transmit
{
port-fifo
|
queue
|
supervisor-sram
} [
asic
number
|
port
number
[
asic
number
]]
Display transmit information. The keywords have these meanings:
•
port-fifo
—Display the contents of the port-FIFO information
register.
•
queue
—Display the contents of the queue information
register.
•
supervisor-sram
—Display supervisor SRAM information.
•
asic
number
—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
•
port
number
—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.
vct
[
asic
number
|
port
number
[
asic
number
]]
Display the VLAN compression table entries for the specified
ASIC or for the specified port and ASIC. The keywords have these
meanings:
•
asic
number
—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
•
port
number
—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
version
Display version and device type information for port ASICs.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
