C-15
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
show platform pm
show platform pm
Use the
show platform pm
privileged EXEC command to display platform-dependent port-manager
information.
show platform pm
{
counters | group-masks | idbs
{
active-idbs
|
deleted-idbs
}
| if-numbers |
link-status | platform-block | port-info
interface-id
|
vlan
{
info
|
line-state
}
[
|
{
begin
|
exclude
|
include
}
expression
]
Syntax Description
Note
Though visible in the command-line help strings, the
stack-view
keyword is not supported.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter
| exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
counters
Display module counters information.
group-masks
Display EtherChannel group masks information.
idbs
{
active-idbs
|
deleted-idbs
}
Display interface data block (IDB) information. The keywords have these
meanings:
•
active-idbs
—Display active IDB information.
•
deleted-idbs
—Display deleted and leaked IDB information.
if-numbers
Display interface numbers information.
link-status
Display local port link status information.
platform-block
Display platform port block information.
port-info
interface-id
Display port administrative and operation fields for the specified interface.
vlan
{
info
|
line-state
}
Display platform VLAN information. The keywords have these meanings:
•
info
—Display information for active VLANs.
•
line-state
—Display line-state information.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
