2-387
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
Chapter 2 Cisco
Catalyst
Blade Switch 3030 Cisco IOS Commands
show parser macro
show parser macro
Use the
show parser macro
user EXEC command to display the parameters for all configured macros
or for one macro on the switch.
show parser macro
[{
brief | description
[
interface
interface-id
] |
name
macro-name
}] [ | {
begin
|
exclude
|
include
}
expression
]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter |
exclude output
, the lines that contain
output
do not appear, but the lines that contain
Output
appear.
Examples
This is a partial output example from the
show parser macro
command. The output for the Cisco-default
macros varies depending on the switch platform and the software image running on the switch:
Switch#
show parser macro
Total number of macros = 6
--------------------------------------------------------------
Macro name : cisco-global
Macro type : default global
# Enable dynamic port error recovery for link state
# failures
errdisable recovery cause link-flap
errdisable recovery interval 60
<output truncated>
brief
(Optional) Display the name of each macro.
description
[
interface
interface-id
]
(Optional) Display all macro descriptions or the description of a specific
interface.
name
macro-name
(Optional) Display information about a single macro identified by the macro
name.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SEE
This command was introduced.
