Administration: Discovery
Discover - LLDP
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
141
9
•
PSE MDI Power State
—Indicates if MDI power is enabled on the port.
•
PSE Power Pair Control Ability
—Indicates if power pair control is supported on the
port.
•
PSE Power Pair
—Power pair control type supported on the port.
•
PSE Power Class
—Advertised power class of the port.
•
Power Type
—Type of pod device connected to the port.
•
Power Source
—Port power source.
•
Power Priority
—Port power priority.
•
PD Requested Power Value
—Amount of power allocated by the PSE to the PD.
•
PSE Allocated Power Value
—Amount of power allocated to the sourcing equipment
(PSE).
802.3 Energy Efficient Ethernet (EEE) (If device supports EEE)
•
Local Tx
—Indicates the time (in micro seconds) that the transmitting link partner waits
before it starts transmitting data after leaving Low Power Idle (LPI mode).
•
Local Rx
—Indicates the time (in micro seconds) that the receiving link partner requests
that the transmitting link partner waits before transmission of data following Low
Power Idle (LPI mode).
•
Remote Tx Echo
—Indicates the local link partner’s reflection of the remote link
partner’s Tx value.
•
Remote Rx Echo
—Indicates the local link partner’s reflection of the remote link
partner’s Rx value.
4-Wire Power via MDI
•
4-Pair PoE Supported
—Indicates system and port support enabling the 4-pair wire
(true only for specific ports that have this HW ability).
•
Spare Pair Detection/Classification Required
—Indicates that the 4-pair wire is
needed.
•
PD Spare Pair Desired State
—Indicates a pod device requesting to enable the 4-pair
ability.
•
PD Spare Pair Operational State
—Indicates whether the 4-pair ability is enabled or
disabled.
