IP Configuration
IPv4 Management and Interfaces
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
285
16
•
IP Address Type
—The available options are:
-
DHCP
—Received from DHCP server.
-
Static
—Entered manually. Static interfaces are non-DHCP interfaces that created
by the user.
-
Default
—The default address that exists on the device by default, before any
configurations have been made.
•
IP Address
—Configured IP address for the interface.
•
Mask
—Configured IP address mask.
•
Status
—Results of the IP address duplication check.
-
Tentative
—There is no final result for the IP address duplication check.
-
Valid
—The IP address collision check was completed, and no IP address collision
was detected.
-
Valid-Duplicated
—The IP address duplication check was completed, and a
duplicate IP address was detected.
-
Duplicated
—A duplicated IP address was detected for the default IP address.
-
Delayed
—The assignment of the IP address is delayed for 60 second if DHCP
Client is enabled on startup in order to give time to discover DHCP address.
-
Not Received
—Relevant for DHCP Address. When a DCHP Client starts a
discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is
obtained. This dummy address has the status of “Not Received”.
STEP 3
Click
Add.
STEP 4
Select one of the following fields:
•
Interface
—Select the port, OOB port, LAG, Loopback or VLAN as the interface
associated with this IP configuration, and select an interface from the list.
•
IP Address Type
—Select one of the following options:
-
Dynamic IP Address
—Receive the IP address from a DHCP server.
-
Static IP Address
—Enter the IP address.
STEP 5
If
Static IP Address
was selected, enter the following fields:
•
IP Address
—Enter the IP address of the interface.
•
Mask
