Cisco Aironet 350 Series Скачать руководство пользователя страница 312

Страница: 312 / 762

VLAN Management

Voice VLAN

256

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

•

CoS/802.1p

—Select a CoS/802.1p value that to be used by LLDP-MED as a voice

network policy. Refer to

Administration > Discovery > LLDP > LLDP MED Network

Policy

for additional details.

•

DSCP

—Selection of DSCP values that to be used by the LLDP-MED as a voice

network policy. Refer to

Administration > Discovery > LLDP > LLDP MED Network

Policy

for additional details.

The following

Operational Status

fields are displayed:

•

Voice VLAN ID

—Voice VLAN.

•

CoS/802.1p

—Value being used by LLDP-MED as a voice network policy. Refer to

Administration > Discovery > LLDP > LLDP MED Network Policy

for additional

details.

•

DSCP

—Value being used by the LLDP-MED as a voice network policy.

The following

Dynamic Voice VLAN Settings

fields are displayed:

•

Dynamic Voice VLAN—

Select this field to disable or enable voice VLAN feature in

one of the following ways:

Enable Auto Voice VLAN

—Enable Dynamic Voice VLAN in Auto Voice VLAN

mode.

Enable Telephony OUI

—Enable Dynamic Voice VLAN in Telephony OUI mode.

Disable

—Disable Auto Voice Vlan or Telephony OUI.

•

Auto Voice VLAN Activation

—If Auto Voice VLAN was enabled, select one of the

following options to activate Auto Voice VLAN:

Immediate

—Auto Voice VLAN on the device is to be activated and put into

operation immediately if enabled.

By External Voice VLAN Trigger

—Auto Voice VLAN on the device is activated and

put into operation only if the device detects a device advertising the voice VLAN.

NOTE

Manually re-configuring the voice VLAN ID, CoS/802.1p, and/or DSCP from

their default values results in a static voice VLAN, which has higher priority than auto
voice VLAN that was learned from external sources.

STEP 3

Click

Apply

. The VLAN properties are written to the Running Configuration file.

Содержание Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды

Cisco Aironet 350 Series, Руководство администратора

Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды