Cisco Aironet 350 Series Скачать руководство пользователя страница 630

Страница: 630 / 762

Access Control

ACL Binding

410

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

ACL Binding (VLAN)

To bind an ACL to a VLAN:

STEP 1

Click

Access Control

ACL Binding (VLAN)

STEP 2

Select a VLAN and click

Edit

If the VLAN you require is not displayed, add a new one.

STEP 3

Select one of the following:

•

MAC-Based ACL

—Select a MAC-based ACL to be bound to the interface.

•

IPv4-Based ACL

—Select an IPv4-based ACL to be bound to the interface.

•

IPv6-Based ACL

—Select an IPv6-based ACL to be bound to the interface.

•

Default Action

—Select one of the following options:

Deny Any

—If packet does not match an ACL, it is denied (dropped).

Permit Any

—If packet does not match an ACL, it is permitted (forwarded).

NOTE

Default Action can be defined only if IP Source Guard is not activated on the

interface.

STEP 4

Click

Apply

. The ACL binding is modified, and the Running Configuration file is updated.

NOTE

If no ACL is selected, the ACL(s) that is previously bound to the VLAN are unbound.

ACL Binding (Port)

To bind an ACL to a port or LAG:

STEP 1

Click

Access Control

ACL Binding (Port)

STEP 2

Select an interface type

Ports/LAGs

(Port or LAG).

STEP 3

Click

. For each type of interface selected, all interfaces of that type are displayed with a

list of their current ACLs (for

Input ACL

s and

Output ACL

s):

•

Interface

—Identifier of interface on which ACL is defined.

•

MAC ACL

—ACLs of type MAC that are bound to the interface (if any).

•

IPv4 ACL

—ACLs of type IPv4 that are bound to the interface (if any).

Содержание Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды

Cisco Aironet 350 Series, Руководство администратора

Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды