Cisco Aironet 350 Series Скачать руководство пользователя страница 399

Страница: 399 / 762

IP Configuration

IPv6 Management and Interfaces

312

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

•

Type

—The manner in which the IP address was assigned to the client. The possible

options are:

Static

—The hardware address of the host was mapped to an IP address.

Dynamic

—The IP address, obtained dynamically from the device, is owned by the

client for a specified period of time. The IP address is revoked at the end of this
period, at which time the client must request another IP address.

•

State

—The possible options are:

Allocated

—IP address has been allocated. When a static-host is configured, its state

is allocated.

Declined

—IP address was offered but not accepted, therefore it is not allocated.

Expired

—The lease of the IP address has expired.

Pre-Allocated

—An entry will be in pre-allocated state from the time between the

offer and the time that the DHCP ACK is sent from the client. Then it becomes
allocated.

STEP 2

Click

Delete

. The Running Configuration file is updated.

IPv6 Management and Interfaces

This section covers the following topics:

•

Overview

•

IPv6 Global Configuration

•

IPv6 Interfaces

•

IPv6 Tunnel

•

IPv6 Addresses

•

IPv6 Router Configuration

•

IPv6 Default Router List

•

IPv6 Neighbors

•

IPv6 Prefix List

Содержание Aironet 350 Series



























































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды

Cisco Aironet 350 Series, Руководство администратора

Результаты поиска

Содержание Aironet 350 Series

Отзывы:

Похожие инструкции для Aironet 350 Series

Бренды по названию

Популярные бренды