Administration: Discovery
Discovery - CDP
158
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
9
•
Neighbor Interface
—Interface number of the neighbor through which frame arrived.
•
Native VLAN
—Neighbors native VLAN.
•
Application
—Name of application running on the neighbor.
•
Duplex
—Whether neighbors interface is half or full duplex.
•
Addresses
—Neighbors addresses.
•
Power Drawn
—Amount of power consumed by neighbor on the interface.
•
Version
—Neighbors software version.
•
Power Request
—Power requested by PD that is connected to the port.
•
Power Request List
—Each PD may send a list (up to 3) of supported power levels.
•
Power Available
-
Request ID
—Last power request ID received echoes the Request-ID field last
received in a Power Requested TLV. It is 0 if no Power Requested TLV was received
since the interface last transitioned to Up.
-
Power Management ID
—Value incremented by 1 (or 2, to avoid 0) each time any
one of the following events occur:
Available-Power or Management Power Level fields change value
A Power Requested TLV is received with a Request-ID field that is different from
the last-received set (or when the first value is received)
The interface transitions to Down
-
Available Power—
Amount of power consumed by port.
-
Management Power Level—
Displays the supplier's request to the pod device for its
Power Consumption TLV. The device always displays “No Preference” in this field.
•
4-Wire Power via MDI
-
4-Pair PoE Supported
—Indicates system and port support enabling the 4-pair wire
(true only for specific ports that have this HW ability).
-
Spare Pair Detection/Classification Required
—Indicates that the 4-pair wire is
needed.
-
PD Spare Pair Desired State
—Indicates a pod device requesting to enable the 4-pair
ability.