Cisco 8851, Руководство администратора

Страница: 53 / 310

Table 9: Ethernet Configuration Submenu
Description Default Field Type
or Choices Field
Enables you to turn 802.1x authentication on or turn it off. Valid
options are:
• On
• Off
Off Device
authentication 802.1x
authentication
• Transaction status — Indicates different authentication status
when you turn on 802.1x in the Device authentication field.
◦ Disabled — This is default status.
◦ Connecting — Indicates 802.1x authentication is
initiated in the device.
◦
Authenticated
—
Indicates 802.1x authentication is
established in the device.
• Protocol — Specifies the protocol of the server.
Disabled Transaction status
Allows you to select speed and duplex of the network port.
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both
to autonegotiate.
If you change the setting of this option, you must change the PC
Port config option to the same setting.
Auto Auto
10MB half
10MB full
100 MB half
100MB full
100 half
Switch port config
Allows you to select Speed and duplex of the Computer (access)
port.
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both
to autonegotiate.
If you change the setting of this option, you must change the
Switch Port config option to the same setting.
Auto Auto
10MB half
10MB full
100 MB half
100MB full
100 half
PC port config
Allows you to enable or disable Cisco Discovery Protocol (CDP).
CDP is a device-discovery protocol that runs on all Cisco
manufactured equipment.
Using CDP, a device can advertise its existence to other devices
and receive information about other devices in the network.
On On
Off
CDP
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
37
Configure the Network from the Phone