Cisco 8851, Руководство администратора

Страница: 255 / 310

Description Parameter
Disables secure call feature.
Default: *19.
Secure One Call
Deact Code
The star code used for paging the other clients in the group.
Defaults to *96.
Paging Code
The star code used for parking the current call.
Defaults to *38.
Call Park Code
The star code used for picking up a ringing call.
Defaults to *36.
Call Pickup Code
The star code used for picking up a call from the call park.
Defaults to *39.
Call Unpark Code
The star code used for picking up a group call.
Defaults to *37.
Group Call Pickup
Code
These codes tell the IP phone what to do when the user places the current call on hold
and is listening to the second dial tone.
One or more *code can be configured into this parameter, such as *98, or *97|*98|*123,
and so on. Max total length is 79 chars. This parameter applies when the user places
the current call on hold (by Hook Flash) and is listening to second dial tone. Each *code
(and the following valid target number according to current dial plan) entered on the
second dial-tone triggers the phone to perform a blind transfer to a target number that
is prepended by the service *code.
For example, after the user dials *98, the IP phone plays a special dial tone called the
Prompt Tone while waiting for the user the enter a target number (which is checked
according to dial plan as in normal dialing). When a complete number is entered, the
phone sends a blind REFER to the holding party with the Refer-To target equals to
*98<target_number>. This feature allows the phone to hand off a call to an application
server to perform further processing, such as call park.
The *codes should not conflict with any of the other vertical service codes internally
processed by the IP phone. You can empty the corresponding *code that you do not
want to the phone to process.
Referral Services
Codes
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
239
Cisco IP Phone Web Page