CIAT AirCompact Control, Руководство по управлению

Страница: 59 / 69

59
Bit 0 = Supply air
motor alarm
Bit 1 = Return air
motor alarm
Bit 2 = Not used
Bit 3 = Supply air filter
CF1 dirty alarm
Bit 4 = Supply air filter
CF1 blocked alarm
Bit 5 = Not used
Bit 6 = Return air filter
CF1 dirty alarm
Bit 7 = Return air filter
CF1 blocked alarm
Bit 8 = Additional filter
CF2 dirty alarm
Bit 9 = Not used
Bit 10 = Not used
Bit 11 = Not used
Bit 12 = Not used
Bit 13 = Fire alarm
Bit 14 = Antifreeze
protection alarm
Bit 15 = Electric heater
safety thermostat
alarm
Alarm 2 value:
Bit 0 = Low supply air
temperature alarm
Bit 1 = High supply air
temperature alarm
Bit 2 = Low ambient or
return air temperature
alarm
Bit 3 = High ambient
or return air
temperature alarm
Bit 4 = Humidifier
alarm
Bit 5 = Heat recovery
unit fouled alarm
Bit 6 = pLAN alarm
Bit 7 = Timer lithium
battery alarm
Bit 8 = Duct pressure
alarm
Bit 9 = Not used
Bit 10 = Not used
Bit 11 = Not used
Bit 12 = Not used
Alarme2 DPT_Value_2_Ucount 7.001
OUT
28
REG
Heating requirement
supplied by unit Chaud DPT_Value_2_Ucount 7.001 OUT 1281 REG
Cooling requirement
supplied by unit Froid DPT_Value_2_Ucount 7.001 OUT 1282 REG
Unit On/Off command
via CMS OnoffGTC DPT_Switch 1.001 IN 280 COIL
Unit On/Off command
return via CMS OnoffGTC DPT_Switch 1.001 OUT 280
COIL
Reset of alarms not
present command ResetAlarmes DPT_Switch 1.001 IN 281
COIL
Reset of alarms not
present command
return ResetAlarmes DPT_Switch 1.001 OUT 281
COIL
Electric heater load
shedding Delestage DPT_Switch 1.001 IN 282
COIL
Electric heater load
shedding return Delestage DPT_Switch 1.001 OUT 282
COIL
Temperature-
dependent machine
actuation in Eco /
Comfort mode ConfortEcoTemp DPT_Switch 1.001 IN 283
COIL
Temperature-
dependent machine
actuation return in
Eco / Comfort mode ConfortEcoTemp DPT_Switch 1.001 OUT 283
COIL
Flow rate-dependent ConfortEcoDebit DPT_Switch 1.001 IN 284
COIL