CIAT AirCompact Control, Руководство по управлению

Страница: 64 / 69

64
. Open or create the final project for the system and right-click on the mouse to paste the CAREL plugin, once or more
according to the number of CAREL devices to be integrated. The address of each device is automatically incremented. If
necessary, you can manually change the address of a device in
Properties .
5.5.6
Assigning the physical address
The physical address of the CAREL KNX card is assigned using the standard procedure.
You must be sure that:
. the Bus wire network is drawn out and connected
. the Bus is energised
. the CAREL card is connected to the KNX network
. the controller is powered on
Use the mouse to select the controller to be configured, right-click to open the "
Download " menu, Fig.7.d and Fig.7.e.
Select " Program Individual Address " to activate the configuration procedure and press the button on the card. The green LED on
the card goes out to indicate when the operation is complete. If the card address has already been configured, the message " The
address is already used by another device " is displayed.