CIAT AirCompact Control, Руководство по управлению

Страница: 37 / 69

37
Timer t2
Daylight Saving Time and Standard Time switchover management activated
Summer/Winter: ACTIVE
Transit. time 060min
Start:LAST SUNDAY
in MARCH at 02.00
End:LAST SUNDAY
in OCTOBER at 03.00
2.9
Communication menu
SUPERVISION g1
Level 3 access
Protocol -----------
Choice of the communication protocol with the CMS (CAREL, LON, MODBUS RTU, KNX, WEB, MODBUS TCP)
Speed ----- bauds
Selection of the speed of communication with the CMS (4800 mandatory for LonWorks

)
Address ---
Address of the controller on the network for communication with the CMS (001 mandatory for LonWorks

)
Unit control ----
Selection of the On/Off control via the CMS
pLAN NETWORK pL1
Controller address 01
Address of the controller on the pLAN communication network to the user terminal
pLAN network state
When the system starts up, the pLAN network may encounter a number of problems (card fault and terminal start-up) caused by
incorrect connections or a wrong address. The state of the pLAN network can be displayed in real time on this special mask in
order to identify which devices (controller or terminal) are correctly connected and addressed.
Network addresses 1 to 32 are displayed. The small rectangles represent the terminals and the large rectangles , the
controllers.
If the symbols flash, the pLAN may be unstable or, more likely, two components share the same address.
The example indicates that the network is formed of 1 controller with the address 1 and 1 terminal with the address 17.
2.10
Alarms menu
Pressing the

button confirms and clears all faults that are no longer present.
To view faults that are still present, press the buttons

The following screen appears when no faults are present:
.
No alarms!
2.11
Test mode menu
f1
Overriding the outputs
Unit off