CIAT AirCompact Control, Руководство по управлению

Страница: 38 / 69

38
If all the controller's outputs are overridden, the alarms will not be signalled on the door of the electrical box or on the display.
Disconnecting the display will maintain the override and may result in damage to the hardware.
This menu can only be accessed in level 3 and with the unit off.
WARNING!
ACTIVATION OF ALL OVERRIDES IS THE PROGRAMMER'S RESPONSIBILITY
NONE OF THE SAFETY DEVICES IS OPERATIONAL
The unit must be set to " ".
Select the unit to be changed by pressing the

button or the

button. Confirm by pressing ENTER .
The cursor places itself below the override authorisation ( free or overridden ). Confirm by pressing ENTER .
The cursor places itself under the override value. Display the new value by pressing the

button or the

button. Confirm by
pressing ENTER .
The unit is now in "manual mode".
The overrides are cancelled when the unit is set back to "on"
Fans f2
--------
Supply air………..………… --
Return air...………..…...…… --
Damper .
--------
Control state..……………… --
Fault relay f3
--------
Danger...………..…………… --
Maintenance…………...…… --
Valves f4
--------
Coil 1....……..……….….. ---%
Coil 2....……..…………... ---%
DX module...…………..…… --
Electric heater .
Stage 1…..……………..…… --
Stage 2………………….…… --
Mixing f5
--------
Opening.……………..……… -
Closing….………….....…… -
State……......……..……... ---%
Bypass f6
--------
Control state..……………… --
Humidifier .
Control state..…………….… --