Christie Mirage S+, Руководство пользователя

Страница: 78 / 169

OPERATION
3-40
Roadster/Mirage S+ User’s Manual
NOTE: When multiple projectors are being used and you want to adjust the color
and edge blending settings for individual projectors to create one seamless image,
you must assign different numbers for each projector to allow toggling back and
forth between projectors while adjustments are being made.
Network Routing
NOTE: Not applicable for stand-alone projectors or simple serial networks with only
one type of controller and linking .
SEPARATE:
Select “Separate” (factory default) to keep RS232, RS422 and Ethernet
messages on their respective paths instead of being broadcast to the other types of
ports. In Figure 3.19A, RS422 controls only the projector to which it is connected. In
Figure 3.19B, either RS232 or RS422 will control the network.
Figure 3.19. Using the “Network Routing” Option
RS232 AND RS422 JOINED:
Messages originating from an RS232 or RS422 controller
will be relayed to all RS232or RS422 ports. Any Ethernet communication, however,
will not.
RS232 AND ETHERNET JOINED:
Messages to and from the RS232 ports will also be
relayed to the Ethernet port, and vice versa. Any RS422 communications will be
isolated.
ALL JOINED:
All messages reach all ports, regardless of type.
Ethernet Settings
(SUBMENU)
NOTE: Recommended for network administrators only.