Christie Mirage S+, Руководство пользователя

Страница: 35 / 169

INSTALLATION & SETUP
Roadster/Mirage S+ User’s Manual
2-29
Once the projector is properly set up and producing an image, you are ready to make
quick lens adjustments. Refer to
3.3, Using the Keypads and 3.4, Navigating the
Menus if you are unfamiliar with using the keypad and menu system.
Lens Adjustments
NOTE: Not applicable to fixed lenses. Focus fixed lens by turning focus ring on lens.
With the input image displayed:
o
If remote keypad: Press Zoom or
.
o
If built-in keypad: Press Zoom
or
.
Hold the key down to see the effect –arrows in the display indicate the
direction of the zoom (Figure 2.40).
With the input image displayed:
o
If remote keypad: Press Focus or
.
o
If built-in keypad: Press Focus
or .
Hold the key down to see the effect – arrows in the display indicate
the direction of the focus (Figure 2.41).
•
• LENS OFFSET: To move the image:
o
If remote keypad: Press either Lens H or
Lens V
(Figure 2.42).
o If built-in keypad: Press
Lens
Shift
and use the arrow keys.
Both styles of remote IR keypads—ergonomic or “brick”
rental staging—can be converted to a wired remote by adding
the appropriate cable (provided). This is most useful for
simple applications in which it is impractical to communicate
via IR, such as when the projector is in another room and
cannot respond to an IR signal, or when you wish to connect
to and control individual projectors within a group.
To control the projector when signals from a remote keypad cannot reach the
projector, use the projector’s built-in keypad. The nearby LED display provides
feedback indicating current status and activities of the projector. Because the built-in
keypad has fewer keys than the remote keypad, certain projector functions are
accessible only through the menu system rather than via a direct key.
2.10 Zoom, Focus &
Lens Offset
Zoom
'
Figure
2.40
Focus
Figure
2.41
Figure 2.42
2.11 Keypad
Protocols and
Conversion
Sample Keypad
Cable