Christie Mirage S+, Руководство пользователя

Страница: 139 / 169

GLOSSARY
Roadster/Mirage S+ User’s Manual
A-3
Located at
INPUT 3
and
INPUT 4
, this device converts NTSC 3.58, NTSC 4.4, PAL,
PAL-N, PAL-M, or SECAM to RGB video.
The sharpness of a display from a video source.
A type of rear-projection screen which spreads the light striking it. Screen gain is less
than 1 but audience viewing angles are increased.
An adjustment that affects the display of an image. Such display settings include
contrast, brightness, tint, blanking, size, offsets, and others.
The maximum frequency of the pixel clock. Also known as pixel clock rate.
The Enhanced Extended Display Identification Data standard, established by VESA,
enables properties (such as resolution) of a display device to be detected by the
display card in a controlling device such as a PC. The PC, in turn, can then output in
a matching format to fill the display. Some sources used with the projector are VESA
E-EDID reported.
A very rapid variation in image brightness caused by a frame rate that is too slow.
(See
Interlace ) See also Lamp Flicker .
The intensity of visible light per square foot.
The luminance (brightness) which results from one foot-candle of illumination falling
on a perfectly diffuse surface.
The frequency at which complete images are generated. For non-interlaced signals,
the frame rate is identical to the vertical frequency. For interlaced signals, the frame
rate (also known as field rate) is one half of vertical frequency.
The ability of a screen to direct incident light to an audience. A flat matte white wall
has a gain of approximately 1. Screens with gain less than 1 attenuate incident light;
screens with gain more than 1 direct more incident light to the audience but have a
narrow viewing angle. For example: An image reflecting off a 10 gain screen appears
10 times brighter than it would if reflected off a matte white wall. Curved screens
usually have larger gain than flat screens.
See Cross-talk.
General Purpose Input Output, used for remote control of a limited number of
programmable functions by direct signal or dry-contact connection.
High-definition Television (1035, 1080 and 1125 lines interlace, and 720 and 1080
line progressive formats with a 16:9 (i.e. 1.77) aspect ratio.
A display of help information regarding the current task or presentation.
The frequency at which scan lines are generated, which varies amongst sources. Also
called horizontal scan rate or line rate.
The difference between the center of the projected image and the center of the
projector lens. For this projector, this value is expressed as the maximum percentage
of the image that can be projected to one side of the lens center without degrading the
Decoder
'
Detail
'
Diffused Screen
'
Display Setting
'
Dot Clock
'
E-EDID
'
Flicker
'
Foot-candle
'
Foot-lambert
'
Frame Rate
'
Gain or Screen Gain
'
Ghosting
'
GPIO
'
HDTV
'
Help Text
'
Horizontal Frequency
'
Horizontal Offset
'