BASIC OPERATION
CP2000-X User Manual
3-17
020-100031-01 Rev . 1 (03-2009)
TOUCH PANEL –
Indicates the software functionality of the Touch Panel Controller
(TPC), its menu language, and identifies its main operating system.
SSM –
Indicates which System Supervisor Module is installed (H/W) and what SSM
software is present (Main and Boot portions).
ENGINE –
Indicates the main processing software in the projector. This is a summary
of the
Interface
,
Formatter Interface
and
Processor
entries that appear below it in the
About
menu—i.e., any change to one of these elements would automatically denote a
new Engine version.
NOTE:
The remaining individual red, green and blue formatters are independent of
Engine version.
NOTE:
Password-protected; Requires Advanced, Admin, or Installer rights.
GENERAL DESCRIPTION:
The TPC’s three
Custom
menus enable installers (service),
administrators or advanced users to tailor projector processing as they wish for any
type of incoming source, including 3D material, and collect these settings into a
unique
channel
that any user can select at the
Main
menu. Up to 32 channels can be
defined.
Custom Page-1
and
Page-2
: These two menus consist of numerous display
settings that can be adjusted as desired, then defined collectively as a custom
setup or
channel
. Each defined channel then appears as a button on the
Main
menu where any user can select it, providing a reliable way to quickly and
correctly change the on-screen display to suit the source content. Alternatively, if
a pre-defined
Projector Configuration File (PCF)
has been supplied with
distributed content (rare) and the “Use PCF” checkbox checked, those
Custom
options which are already defined in the PCF (Source, Target Color, Color
Space, Gamma and LUT-CLUT) disappear from the
Custom
menus and are
protected from further modification. The channel defined in such a case will thus
be based on 1) the display settings in the supplied PCF and 2) the remaining
Custom
parameters that are
not
contained in a PCF: the physical location of the
input connection (such as a cinema port or DVI port), the screen format, data
format, and processing path.
Custom 3D Control
: This menu provides numerous controls for adjusting and
synchronizing incoming 3D signals (always dual L/R HD-SDI signals at the
SMPTE A and B ports) with each other and with external 3D equipment such as
screens, emitters and glasses.
SAVING YOUR SETTINGS:
Changes in
Custom
menus are saved when you leave the
menu.
Using the Custom 1 and 2 Menus
As shown in Figure 3.7and Figure 3.8, clearing or checking the “Use PCF” checkbox
determines which
Custom
settings are available for use.
TPC Custom Menus
Содержание CP2000-X
