Chattanooga SENIOR SOLUTIONS, Руководство по обслуживанию

Страница: 60 / 108

55
Senior Solutions™ Therapy System
6 REMOVAL/REPLACEMENT
FIGURE 6.10
FIGURE 6.11
CHANNEL 3/4 ELECTROTHERAPY MODULE SHOWN
Install all cables, Lead Wires, etc. to the
Therapy System and Module where
applicable.
Refer to page 14 for Symbol
Definitions See Figure 6.10.
Turn the System On using the On/Off
Switch. The system will automatically
recognize the added module and display
a configuration change message.
See
Figure 6.11.
Read and carefully follow the instructions
on the Screen.
C. Module Removal
Remove Module in reverse order of
installation beginning with
step A, 13 .
After module is removed, follow instructions
in steps
A, 14 and A, 15.
13.
14.
15.
1.
2.
Verify that the module installed is the module
displayed in the message BEFORE pressing the
START Button. If it is not, DO NOT press the START
Button. Turn the system OFF and back ON. If the
problem persists, call the dealer or Chattanooga
Group Technical Support immediately. DO NOT USE
THE SYSTEM until all necessary repairs are made by
a Technician certified by Chattanooga Group. If use
is attempted before repairs are made, the system
may operate unpredictably and has the potential
of causing injury to the patient or damage to the
system internal components.