Chattanooga SENIOR SOLUTIONS Скачать руководство пользователя страница 29

Страница: 29 / 108

Senior Solutions™ Therapy System

5 TROUBLESHOOTING

129

Warning

sEMG Data Card full.

sEMG Data Card faulty. Insert a known good sEMG Data Card. If problem continues,

contact dealer or factory for service.

135

Warning

Control Board Software upgrade warning.

Upgrade Control Board Software to latest version. Contact dealer or Chattanooga Group for
latest software upgrade and instructions.

136

Warning

Stim Board Main Software upgrade warning.

Upgrade Stim Board Software to latest version. Contact dealer or Chattanooga Group for
latest software upgrade and instructions.

137

Warning

Stim Board Main Software upgrade warning.

Upgrade Stim Board Software to latest version. Contact dealer or Chattanooga Group for
latest software upgrade and instructions.

138

Warning

Ultrasound Board Software upgrade warning.

Upgrade Ultrasound Board Software to latest version. Contact dealer or Chattanooga Group
for latest software upgrade and instructions.

Code

Number

Type

Message

Probable Cause

Possible Remedies

118

Warning

Attempting to save additional User Protocols or Sequences after
system memory has reached the maximum allowed (200).

Delete some User Protocols or Sequences. Refer to appropriate section of the Therapy
System User Manual for instructions.

119

120

121

122

Warning

Attempted to read a treatment from Patient Data Card that is

not a valid treatment for the system.

Attempted to use a Non-Patient Data Card.

No Patient Data Card inserted into system port.

Unknown type of smart card inserted into system.

Use a Patient Data Card with proper treatment data for the system.

Properly insert a Patient Data Card.

Insert a known good Patient Data Card.

If problem persists, insert a known good Patient Data Card. If problem continues, contact

dealer or Factory for service.

123

Warning

Patient Data Card is full.

Erase Patient Data Card. Refer to Therapy System User Manual for instructions.

124

Warning

Patient Treatment Data already saved..

Cannot save same data again on Patient Data Card.

Use a new Patient Data Card to resave data.

Erase Patient Data Card and resave treatment data.

125

Warning

Multimedia Card (MMC) not in system port.

Properly insert the MMC card into the system port.

Insert a known good MMC Card. If problem continues, contact dealer or Chattanooga

Group for Service.

126

Warning

No valid channels are available for attempted treatment.

Complete existing treatment before attempting to START another.

Reset Therapy System by turning main power switch Off and On.

127

128

Warning

No sEMG Channels are available for treatment.

No sEMG Module installed or detected by system.

Wait until current treatment is complete.

Reset Therapy System by turning main power switch Off and On.

Make certain sEMG Module is properly installed. Refer to sEMG Module User Manual for

installation instructions.

Replace sEMG Module with known good sEMG Module.

If problem continues, contact dealer or factory for service.

5.1 THERAPY SYSTEM ERROR MESSAGES (CONTINUED)

Содержание SENIOR SOLUTIONS













































































































Результаты поиска

Содержание SENIOR SOLUTIONS

Отзывы:

Похожие инструкции для SENIOR SOLUTIONS

Бренды по названию

Популярные бренды

Chattanooga SENIOR SOLUTIONS, Руководство по обслуживанию

Результаты поиска

Содержание SENIOR SOLUTIONS

Отзывы:

Похожие инструкции для SENIOR SOLUTIONS

Бренды по названию

Популярные бренды