Chattanooga SENIOR SOLUTIONS Скачать руководство пользователя страница 8

Страница: 8 / 108

Senior Solutions™ Therapy System

1 THEORY OF OPERATION

1.6 USER INTERFACE AND ACCESSORIES (CONTINUED)

B. NiMH Battery Module

The NiMH Battery Module incorporates two Nickel Metal Hydride (NiMH) Battery packs and

a PC Board. The PC Board monitors the Charge Level of the Batteries. The Batteries supply 24 VDC to

the system which is then distributed to the respective pcb’s through the system power supply.

The Battery Module is interfaced with the system via a ribbon cable that facilitates communication

with the Control Board and delivery of power to a Two Channel Electrotherapy or Combination

Therapy System. When the Therapy System is connected to a Mains Power Supply via the Power

Cord, the NiMH Battery Module will charge. Once the Module is fully charged the software will STOP

the charging process eliminating the possibility of overcharging. Battery power is used only when

the Therapy System is not connected to a Mains Power Supply.

C. sEMG Module

The Surface Electromyography (sEMG) Module utilizes a PC board to communicate to the Stim and

Control Boards via direct PC Board Contacts. The sEMG module reads and transmits muscle activity

through lead wires and electrodes. The sEMG Module communicates muscle activity data to the Control

Board which can store the data on an sEMG Data Card via the onboard Card Reader/Writer for viewing on

a PC in graph form via the optional Chattanooga Group Patient Data Management System (PDMS)

Software and Card Reader.

D. Operator Remote Control

The Operator Remote Control is just as its name indicates and incorporates a PC Board. The Channel 1/2

Operator Remote Control is interfaced with the Therapy System through its unique connector on the

front of the Therapy System and the Channel 3/4 Electrotherapy Module. The Operator Remote Control

communicates with the Stim Board(s) to the Control Board for the administration of Manual Stim Therapy

only.

E. Therapy System Cart

The Therapy System Cart is designed for use with the Chattanooga Group Therapy System only. The

cart alone provides mobility to the Therapy System and storage of necessary accessories and supplies

used in conjunction with the Therapy System.

Содержание SENIOR SOLUTIONS













































































































Результаты поиска

Содержание SENIOR SOLUTIONS

Отзывы:

Похожие инструкции для SENIOR SOLUTIONS

Бренды по названию

Популярные бренды

Chattanooga SENIOR SOLUTIONS, Руководство по обслуживанию

Результаты поиска

Содержание SENIOR SOLUTIONS

Отзывы:

Похожие инструкции для SENIOR SOLUTIONS

Бренды по названию

Популярные бренды