manualshive.com logo in svg

Chattanooga Intelect Advanced 2771, Руководство пользователя, Страница: 6 / 56

Поделиться
Скачать
Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 6

Intelect® Advanced sEMG and sEMG + Stim Module

3

CAUTION

CAUTION

Read, understand and practice the precautionary and operating 

instructions. Know the limitations and hazards associated with using 

any electrical stimulation. Observe the precautionary and operational 

decals placed on the unit.

• 

DO NOT operate the Intelect Advanced Therapy System sEMG 

Module when connected to any unit other than Chattanooga 

devices.

• 

DO NOT operate this unit in an environment where other devices 

are being used that intentionally radiate electromagnetic energy in 

an unshielded manner.

• 

DO NOT use sharp objects such as a pencil point or ballpoint pen to 

operate the buttons on the control panel as damage may result.

• 

This unit should be operated, transported and stored in 

temperatures between 15° C and 40° C (59° F and 104° F), with 

Relative Humidity ranging from 30%-60%.

• 

Inspect Lead wires  and associated connectors for signs of damage 

before each use. Replace damaged lead wires immediately with 

new before any treatment is applied.

• 

The Intelect Advanced Therapy System is not designed to prevent 

the ingress of water or liquids. Ingress of water or liquids could 

cause malfunction of internal components of the system and 

therefore create a risk of injury to the patient.

• 

This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to other devices in 

the vicinity. However, there is no guarantee that interference will 

not occur in a particular installation. Harmful interference to other 

devices can be determined by turning this equipment on and off. 

Try to correct the interference using one or more of the following: 

Reorient or relocate the receiving device, increase the separation 

between the equipment, connect the equipment to an outlet on a 

different circuit from that to which the other device(s) are connected 

and/or consult the factory field service technician for help.

• 

The Nylatex® Wraps shipped with this unit contain dry natural 

rubber and may cause allergic reactions in patients with allergies 

to latex.

CAUTIONS

SAFETY PRECAUTIONS

Содержание Intelect Advanced 2771

























































Отзывы:

Нет отзывов