Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 56

Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 54

Intelect® Advanced sEMG and sEMG + Stim Module

51

MAINTENANCE

With the system disconnected from the power source, clean the

system with a clean, lint free cloth moistened with water and

mild antibacterial soap. If a more sterile cleaning is needed, use a

cloth moistened with an antimicrobial cleaner.
Do not submerse the system or modules in liquids. Should the

unit accidentally become submersed, contact the dealer or

DJO Service Department immediately. Do not attempt to use a

system that has been wet inside until inspected and tested by a

Service Technician Certified by DJO
Do not allow liquids to enter the ventilation holes in the optional

modules. This could permanently damage the modules.

CARING FOR THE THERAPY SYSTEM

SERVICE

Should the unit require service, warranty, or repair, please contact
the selling dealer or your local DJO customer service.
Ultrasound Applicators require annual calibration, from the date
placed in service, by the Factory or a Service Technician certified
by DJO.

Cleaning the Therapy System

Clean the Therapy System Screen Lens using NOVUS® Polish System.

Contact Novus at: www.novuspolish.com

Cleaning the Lens

NOVUS is the Registered Trademark of NOVUS Inc.

«
...
52
53
54
55
56
»

Содержание Intelect Advanced 2771

























































Отзывы:

Нет отзывов