Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 56

Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 24

Intelect® Advanced sEMG and sEMG + Stim Module

21

Install sEMG Lead Wires to System

Connect a Dura-Stick II 3 cm (1.25”)

disposable electrode to each lead. These

electrodes are designed for use with

Chattanooga equipment and will provide

an accurate reading of sEMG activity.
Leave electrodes on the protective

backing until treatment area has been

prepared.

ACTIVE (BLACK)

PATIENT PREPARATION

S

EMG AND

S

EMG+STIM PATIENT PREPARATION (continued)

Remove the Front Access Cover from the

Therapy System and remove the existing

Lead Wires. Connect the sEMG Lead wires

to the channel(s) desired for use with the

sEMG or sEMG + Stim modality.

CONNECT

S

EMG LEAD WIRES

Replace the Front Access Cover.

NOTE:

Two Channels may be used for sEMG

Therapy at the same time.
If four electrotherapy channels are

available, a maximum of only two may be

used at a time and must be channels 1/2

or 3/4.

Install Dura-Stick™ II Electrodes

Select Modality

Press the sEMG or sEMG + Stim button as

required for the therapy prescribed.

PRESS

S

EMG OR

S

EMG+STIM BUTTON

(GREEN) LEAD

ACTIVE (RED) LEAD

LEAD
REFERENCE

«
...
22
23
24
25
26
...
»

Содержание Intelect Advanced 2771

























































Отзывы:

Нет отзывов