Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 22

Страница: 22 / 56

Intelect® Advanced sEMG and sEMG + Stim Module

REMOVING

EMG MODULE

INSTALLATION & REMOVAL

Prepare System

Prepare the Therapy System for removal of

the sEMG Module. Refer to

Page 15

Remove sEMG Module

Insert a Flat Blade

Screwdriver into the

Release Slot and pry

against the Locking Tab

of the sEMG Module

until the sEMG Module

is free from the

Therapy System.

LOCKING

TAB

RELEASE

SLOT

The sEMG Plug Kit, part number 28027,

is designed to protect the exposed PC

Board contacts on the bottom of the

Therapy System and the Channel 3/4

Electrotherapy Module when the sEMG

Module has been removed.
The sEMG Plug Kit must be installed when

an sEMG Module has been removed for

service related problems and the Therapy

System will be put back into service

without the sEMG module.
The sEMG Plug Kit is installed and

removed in the same fashion as an sEMG

Module. Refer to

page 17

for installation

instructions.

sEMG Plug Kit

The sEMG Module should only be removed for service related problems.

WARNING

Disconnect the system from the power source (outlet or remove

battery module if installed) before attempting any maintenance,

installation, removal, or replacement procedures to prevent electrical

shock and possible damage to system.

Содержание Intelect Advanced 2771

























































Результаты поиска

Содержание Intelect Advanced 2771

Отзывы:

Chattanooga Intelect Advanced 2771, Руководство пользователя, Страница: 22 / 56

Результаты поиска

Содержание Intelect Advanced 2771

Отзывы: