Intelect® Advanced sEMG and sEMG + Stim Module
43
OPERATION
SET UP OF NEW sEMG DATA CARD (continued)
Press the Begin Save button. A message will
appear verifying that sEMG data is being
recorded. After the message has been
removed, have the patient perform the
prescribed contractions.
Begin Save
BEGIN SAVE BUTTON
When the desired character is framed, press
the Accept and Return Arrow button. The
character selected will display in the top of
the screen and the cursor will advance to
the next position.
To move back a character, press the Left
Arrow button.
To discard entire entry, press the back
Button.
Repeat this procedure until the desired
Patient ID is entered.
After Patient ID is entered, press the Save
button.
CHARACTER
DISPLAYED
ACCEPT AND RETURN
ARROW BUTTON
LEFT
ARROW
BUTTON
To delete a character, press the Left Arrow
button until the character to delete is
framed. Press the Delete button.
SAVE
BUTTON
To stop recording, press the End Save
button.
The sEMG Data Card will record
approximately 7 minutes of sEMG data.
End Save