Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 51

Страница: 51 / 56

Intelect® Advanced sEMG and sEMG + Stim Module

TROUBLESHOOTING

ERROR CODES (continued)

Code

Number

Type

Message

Probable Cause

Possible Remedies

137

Warning

Stim Board Main software upgrade warning.

Upgrade Stim Board sSoftware to latest version. Contact dealer or DJO for latest software upgrade and

instructions.

138

Warning

Ultrasound Board software upgrade warning.

Upgrade Ultrasound Board software to latest version. Contact dealer or DJO for latest software upgrade

and instructions.

139

Warning

Laser Board software upgrade warning.

Upgrade Laser Board software to latest version. Contact dealer or DJO for latest software upgrade and

instructions.

140

Warning

MMC software upgrade warning.

Upgrade MMC software to latest version. Contact dealer or DJO for latest software upgrade and

instructions.

141

Warning

Battery Module software upgrade warning.

Upgrade Battery software to latest version. Contact dealer or DJO for latest software upgrade and

instructions.

142

Warning

A Laser Protocol was selected but no Laser Module is installed

on system.

Install Laser Module to Therapy System. Refer to Laser User Manual for installation instructions.

143

Warning

A Laser Protocol was selected but no Laser Applicator connected

to system.

Connect proper Laser Applicator to the system.

If Laser Applicator is connected, reset Therapy System by turning main power switch

Off and On.

Connect a known good Laser Applicator.

If problem continues, send Laser Module to factory for service.

144

Warning

Wrong Laser Applicator connected to system for the protocol

selected.

Connect correct Laser Applicator to the system.

If Applicator is connected, reset Therapy System by turning main power switch Off and On.

Connect a known good Laser Applicator.

If problem continues, send Laser Module to factory for service.

Содержание Intelect Advanced 2771

























































Результаты поиска

Содержание Intelect Advanced 2771

Отзывы:

Chattanooga Intelect Advanced 2771, Руководство пользователя, Страница: 51 / 56

Результаты поиска

Содержание Intelect Advanced 2771

Отзывы: