Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 56

Chattanooga Intelect Advanced 2771 Скачать руководство пользователя страница 21

Intelect® Advanced sEMG and sEMG + Stim Module

18

INSTALLING

S

EMG MODULE (continued)

INSTALLATION & REMOVAL

Install Cables and Accessories

Install all cables and accessories to the Front

Access Panel. Refer to

page 9

for Symbol

Definitions.

Plug Power Cord into an

approved outlet.
Turn the System On

using the On/Off

Switch. The System will

automatically recognize

the added Module and

display a configuration

change message.
Read and carefully

follow the instructions

on the Screen.

CONNECT ALL CABLES

AND ACCESSORIES

Apply Mains Power

Verify that the Module installed is the Module displayed in the message

BEFORE pressing the START Button. If it is not, DO NOT press the START

Button. Turn the System OFF and back ON. If the problem continues, call

the selling dealer or DJO Technical Support immediately.

DO NOT USE THE SYSTEM until all necessary repairs are made by a

Technician certified by DJO. If use is attempted before repairs are made,

the System may operate unpredictably and has the potential of causing

injury to the patient or damage to the System's internal components.

WARNING

«
...
19
20
21
22
23
...
»

Содержание Intelect Advanced 2771

























































Отзывы:

Нет отзывов