CENTURION SYSTEMS VERT-X, Руководство по механическому монтажу

Страница: 46 / 56

page 46 www.CentSys.com
10.3.4.1. Making Up a Bracket for a Non-steel Gate
In the case where the gate is not manufactured from steel or the mounting
point for the front bracket is not on a steel section of the gate, it is necessary
to make up a mounting bracket for the Gate Bracket. This is easily achieved by
purchasing a second Wall Mounting Bracket and welding the Gate Bracket to the
Wall Bracket Mounting Plate. See section 6.6.2
FIGURE 46. ATTACH THE GATE BRACKET ONTO A NON-STEEL GATE
Weld brackets
together
Fasten the welded Gate
Bracket to the gate
Gate
Bracket
Wall Bracket
Mounting Plate
(ordered
separately)
10.3.5. Step 5: Mounting the Gate
Bracket
FIGURE 47. MARK THE C-VALUE
Custom
Bracket
Centre of
gate hinge
C-Value
Wall Bracket
Gate Bracket
Although the installation
is easier when using the
VERT-X Metal Template
(which can be purchased
as an optional extra from
Centurion Systems), it is
possible to install the unit
without the use of the
template.
10.3.5.1. Without Template
Find the corresponding C-Value for
the installation determined in
Section 10.2.
Close the gate leaf and mark the C-Value distance along the gate leaf (measured from
the centre of the gate hinge).
Refer to Figure 47 for details.
S
ECTION
1
0
OPERA
TOR
INS
TALLATION
-OUTW
ARD
OPENING
GATE