CENTURION SYSTEMS VERT-X Скачать руководство пользователя страница 6

Страница: 6 / 56

page 6

www.CentSys.com

ATTENTION

To ensure the safety of people and possessions, it is important that you

read all the following instructions.

Incorrect installation or incorrect use of the product could cause

serious harm to people and pets.

The installer, being either professional or DIY, is the last person

on the site who can ensure that the operator is safely installed, and that

the whole system can be operated safely.

IMPORTANT

SAFETY INSTRUCTIONS

Warnings for the Installer

CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS before beginning to install

the product.

• All installation, repair, and service work to this product must be done by a suitably

qualified person

• Do not activate your gate opener unless you can see it and can determine that its area of

travel is clear of people, pets, or other obstructions

• NO ONE MAY CROSS THE PATH OF A MOVING GATE.

Always keep people and objects

away from the gate and its area of travel

• NEVER LET CHILDREN OPERATE OR PLAY WITH THE GATE CONTROLS,

and do not

allow children or pets near the gate area

• Secure all easily-accessed gate opener controls in order to prevent unauthorised use of

the gate

• Do not in any way modify the components of the automated system
•

Do not install the equipment in an explosive atmosphere: the presence of flammable gas

or fumes is a serious danger to safety

•

Before attempting any work on the system, switch off electrical power and disconnect the

batteries

•

The mains power supply of the automated system must be fitted with an all-pole switch

with contact opening distance of 3mm or greater. Use of a 5A hydraulic breaker with all-

pole circuit break is recommended

•

Make sure that an earth leakage circuit breaker with a threshold of 30mA is fitted

upstream of the system

• Never short-circuit the battery and do not try to recharge the batteries with power supply

units other than that supplied with the product, or manufactured by

Centurion Systems (Pty) Ltd

• Make sure that the earthing system is correctly constructed, and that all metal parts of

the system are suitably earthed

ETY

FIRST

IMPORTA

AFETY

INS

TRUCTIONS

ETY

FIRST

Содержание VERT-X

























































Результаты поиска

Содержание VERT-X

Отзывы:

Похожие инструкции для VERT-X

Бренды по названию

Популярные бренды

CENTURION SYSTEMS VERT-X, Руководство по механическому монтажу

Результаты поиска

Содержание VERT-X

Отзывы:

Похожие инструкции для VERT-X

Бренды по названию

Популярные бренды