CENTURION SYSTEMS VERT-X, Руководство по механическому монтажу

Страница: 45 / 56

page 45 www.CentSys.com
Mount the Wall Bracket in the correct
position onto the wall using the
preferred method as discussed in
Section 6.5 or mount it to the custom
bracket as shown in Figure 44.
FIGURE 44. MOUNT THE WALL BRACKET
FIGURE 45. CUT THE GATE BRACKET
Typical Custom
Bracket
Wall Bracket
Cut Gate Bracket
to length
Gate Hinge Point
D
E
10.3.4. Step 4: Cutting the Gate
Bracket
Determine the E-Value for this
specific installation by following
the example in section 10.3.1 and
substituting the hinge depth of
this specific installation into the
calculation.
Cut the Gate Bracket to the E-Value
length in order to mount the bracket
to the gate and achieve the correct
D-Value.
OPERA
TOR
INS
TALLATION
-OUTW
ARD
OPENING
GATE
S
ECTION
1
0