31
CLASSIC EDGE OUTDOOR FURNACE • OWNER'S MANUAL
4. Remove the bolts securing the combustion fan and remove the
combustion fan.
5. Hold fan so the oil locations are upright; then apply 10 drops of SAE 20
non-detergent oil (e.g., 3-IN-ONE
®
Oil) in each location, as shown.
NOTE: Hold fan so the oil
locations are upright to ensure
the oil will drain down into the
bearings.
6. Install the combustion fan and secure with bolts.
7. Close and secure the airbox cover. Install the outer airbox cover and secure
with screws.
Do not connect power or operate the outdoor furnace with the outer airbox cover
removed. The outer airbox cover must be installed and secured with screws.
3-12. Secondary Air Charge Tube and Refractory
Removing and inspecting the secondary air charge tube and inspecting the
refractory is best done after the outdoor furnace has been shut down and
the firebox has been cleaned according to the Complete Firebox Cleaning
Procedures.
NOTE: The secondary air charge tube and refractory are wear items.
Alignment Pin