33
CLASSIC EDGE OUTDOOR FURNACE • OWNER'S MANUAL
9. Close and secure the airbox cover. Install the outer airbox cover and secure
with screws.
Do not connect power or operate the outdoor furnace with the outer airbox cover
removed. The outer airbox cover must be installed and secured with screws.
10. Connect the electrical power to the outdoor furnace at the main power source.
3-15. Bypass Handle
NOTE: This procedure only applies to Classic Edge 750 models with bypass handles.
1. Using the grease zerk on the bypass handle, add grease.
Grease Zerk
2. Lift and lower the bypass handle several times to distribute the grease.
3-15. Complete Firebox Cleaning Procedures
The procedures outlined here explain how to thoroughly clean the firebox,
Reaction Chamber, heat exchanger and chimney tee. The frequency for
performing this type of cleaning will vary depending on a number of factors,
including your heat load requirements, type of wood used, and the moisture of
the wood.
NOTE: Proper maintenance of the firebox, Reaction Chamber, heat exchanger,
chimney transition box and chimney tee are essential for the outdoor furnace to
function properly and for longevity.
NOTE: It may be best to allow the wood and coals to burn out completely before this
type of cleaning.
CAUTION
Always wear the appropriate personal protective gear (e.g., protective gloves, clothes,
dust mask, etc.) when cleaning ash from the firebox and the Reaction Chamber, etc.
