28
CLASSIC EDGE OUTDOOR FURNACE • OWNER'S MANUAL
CAUTION
Be sure to turn off the FireStar controller before doing this procedure.
2. Remove the wing nut and open the Reaction Chamber door.
3. Use the tapered small end of the cleaning rod to scrape between each fold
of the heat exchanger and to pull the ashes forward.
Cleaning Rod
4. Use the hoe to pull the ash to the front of the furnace; then use a small
shovel to remove all of the ash and deposits from the Reaction Chamber.
Take care not to damage the temperature sensor.
NOTE: It is extremely important to clean all the way to the back of the Reaction Chamber.
To make sure ash is being completely removed, mark the hoe handle when the hoe is
positioned all the way to the back of the Reaction Chamber. Use the mark as a reference
when removing ash.
CAUTION
Take care not to damage the temperature sensor when removing ash.
