CD3 Outpost Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 56

CD3 Outpost Скачать руководство пользователя страница 24

CD3 Products Manual

CD3, General Benefit Corporation |

www.cd3station.com

|

[email protected]

| 612.467.9441

Patent

Pending | Made in USA | © 2019

24

3.5.3 Reach Grabber

The reach grabber tool gives the user the
extended reach beyond the normal so that
they are able to remove lake weeds hanging
from a watercraft or trailer. The grabber
assists a user that has a difficult time
bending or leaning over to reach these
weeds or someone that just needs a longer
reach.  Hold the grabber in either hand at
the handled grip end and squeeze the two
bars together to grasp at the pinchers.
Release the grip and allow the bars to separate to release at the pincher end.

3.5.4 Plug Wrench

The plug wrench is a multi-use tool that is
able to remove Garboard and T-handle style
drain plugs from watercraft. This is a
drain plug removal tool that allows quick and
comfortable removal of the drain plug
without added strain. It is specially designed
not to damage the plug or watercraft as well.

3.6 Lights

The unit is equipped with high visibility, white light, LED lights.  Two are built into the
lower unit body (one in the case of an outpost) and two are on a light pole (one on the
solar rack in the case of the Outpost).  These are located to provide full light for
accessing the tools on the unit in any situation.

«
...
22
23
24
25
26
...
»

Содержание Outpost

























































Отзывы:

Нет отзывов