Catler BM 700, Руководство пользователя

Страница: 24 / 60

24
USING YOUR BM 700 BREAD MAKER
Phase/programme Icon Default Time Time Adjustment (from – to)
Rising 2 0:40 0–60 minutes
Rising 3 0:00 0–60 minutes
Bake
0:30
(Medium degree of
baking) 0–80 minutes
(Degrees of baking: light,
medium, dark)
Keep Warm
01:00 0–60 minutes
Delayed Start Up to 15 hours
AUTOMATIC KEEP WARM FUNCTION
At the end of baking (programmes No. 1 to 9), the bread maker automatically switches to the
Keep Warm mode and the KEEP WARM icon lights up. The Keep Warm mode will operate for
a maximum of 60 minutes. During this time, the bread maker will keep the bread warm but
there will be no additional baking of the bread. This way the bread will not get soggy and
greasy.
After 60 minutes, the bread maker will automatically switch off and stop heating.
If you need to cancel the function earlier, press and hold the
START/PAUSE/STOP button for
3 seconds until the audible warning sounds.
MEMORY FUNCTIONS
The bread maker is equipped with a memory chip that will retain the programme settings if
the power supply is interrupted (or the plug is unplugged from the mains socket) for less than
10 minutes. When the power supply is restored (or you plug the plug into the mains socket),
the bread maker will resume operation. There is no need to press any button.
However, if there is a power failure (or if you disconnect the plug from the mains socket) for
more than 10 minutes, the programme will be cancelled.
REMARK:
If the rising phase has not started when the power supply is interrupted, you can
restart the programme with the same ingredients. The bread will be kneaded several
times.
INTERRUPTING A PROGRAMME IN PROGRESS
If you need to interrupt a programme in progress (e.g. to add more ingredients), you can:
– Press
the START/PAUSE/STOP button briefl y . The bread maker stops running. Press
the START/PAUSE/STOP button again and the bread maker will continue to run, or
automatically resume running after 3 minutes.
– Disconnect the plug from the mains socket and reconnect it within 10 minutes.